DrainGuard composite foundation drainage system drains water away from the exterior of your foundation or basement. The non-woven filter fabric and high density polyethylene core form a channel water to flow through. The filter fabric keeps the soil out of the channel. Water is drained to either a sump croc or to daylight. Fast installation and no gravel used in backfilling means DrainGuard will greatly reduce your building cost while increasing production.

DrainGuard is a composite foundation drainage material which does not need to be covered with gravel.  The non-woven fabric prevents soils from clogging the DrainGuard.

6" x 150' Roll

12" x 150' Roll

Homeowner's note: Rolls will be cut into 3 50' lenghts to allow shipping by UPS.  A splice fitting may be neccessary if lengths needed are greater than 50'

For orders greater than 2 rolls, please contact Applied Technologies

Connects 6 in. and 12 in. DrainGuard to 4 in. corrugated pipe for transport of water to day light or sump crock.

Use to make transition from 6 in. or 12 in. DrainGuard to 4 in. corrugated pipe for intermediate collection of watre along footing.

Makes a corner transition from 6 in. or 12 in. DrainGuard to 4 in. corrugated pipe.

Use to cover the end cut of 6 in. or 12 in. DrainGuard.

For foundations with vertical step downs connects DrainGuard.  6 in. only.

Use to connect two pieces of 6 in. or 12 in DrainGuard together.

Wraps 6 in or 12 in. DrainGuard around inside and outside corners.