Concrete Crack Injection Ports & Packers
Concrete foundation and basement crack repair requires the materials to be injected into the cracks. To This is done by either low pressure with plastic surface ports or by high pressure with drill in place packers. Applied Technologies offers field tested surface ports and packers for the crack injection techician professional and do-it-yourselfer.
Surface Ports
Used to get foundation crack injection materials into a crack. Attach to concrete crack surface using surface sealer epoxy. Large base provides excellent adhesion to concrete foundation crack surface. Large diameter opening minimizes back pressure and "blowouts." Cap fits tightly and stops concrete crack injection material from flowing out of foundation crack before it cures.
Features:
- 1" Base for strong adhesion
- Tightly fitting cap
- Accepts static mixer for injection
Uses:
- Attach over concrete crack to inject materials
Port Over Crack
Surface Ports-250/Box
Price: $85.00
250 count box
Surface Ports-40/Bag
Price: $25.00
40 Count bag
Surface Ports-10/Bag
Price: $9.99
10 Count bag
Corner Ports
Innovative base design allows port to be mounted on an inside or outside corner. Used to get foundation crack injection materials into a crack. Attach to concrete crack surface using surface sealer epoxy. Large base provides excellent adhesion to concrete foundation crack surface. Large diameter opening minimizes back pressure and "blowouts." Cap fits tightly and stops concrete crack injection material from flowing out of foundation crack before it cures.
Features:
- Works on inside and outside corners
- Accepts static mixers
- Cap fits tightly after injection
Use:
- Attached to concrete surface to inject materials into the crack
Corner Ports-250/Box
Price: $107.50
250 Count box
Corner Ports-40/Bag
Price: $28.00
40 Count bag
Corner Ports-10/Bag
Price: $10.99
10 Count bag
Check Balls-100/Bag
Price: $10.60
Steel balls fit inside surface and corner ports and allow the concrete repair material to flow in one direction only. Great for injecting materials overhead.
3/8" x 3" Brass Packer
Drill in place packers are used with a grease gun to get concrete crack injection materials into a concrete crack. Use for concrete cracks that are actively leaking water or have been previously repaired. Rubber sleeve collapses upon tightening to make a tight seal.
Features:
- Zerk fitting
- Collapsable rubber sleeve
- Removable top portion
Brass Packer-100/Bag 3/8" by 3"
Price: $196.10
100 Count Bag
Brass Packer- 40/Bag 3/8" by 3"
Price: $91.25
40 Count bag
Brass Packer- 10/Bag- 3/8" by 3"
Price: $25.00
10 Count bag
Steel Packer-100/Box 5/8" by 3"
Price: $265.00
Drill in place packers are used with a grease gun to get concrete crack injection materials into a concrete crack. Use for concrete cracks that are actively leaking water or have been previously repaired. Rubber sleeve collapses upon tightening to make a tight seal.
Features:
- Zerk fitting
- Collapsable rubber sleeve
- REmovable top portion
5/8" x 3" Plastic Packer
Screw in plastic packers are inserted into drilled holes for concrete crack repair. Push the black sleeve in until tight and then tighten with wrench. Tested to 10,000 psi.
Features
- Zerk fitting
- Fast pitch threads
- Tested to 10,000 psi
Plastic Packer-100/Bag 5/8"by 3"
Price: $225.00
100 Count bag
Plastic Packer-40/Bag 5/8"by 3"
Price: $100.00
40 Count bag
Plastic Packer-10/Bag 5/8"by 3"
Price: $27.50
