DrainGuard Modular Strip Drain for Groundwater Drainage

DrainGuard strip drain is a modular groundwater water collection system.  DrainGuard consists of a dimpled high impact polystyrene core with a nonwoven polypropylene geotextile filter fabric wrapped around it to form a drainage channel.

Groundwater is collected and diverted to either sump pump or it drains to daylight.  Polypropylene fittings connect DrainGuard to 4" pipe.

 

 

Installation of DrainGuard on a foundation wall.

**Note-Waterproofing must be applied prior to application of DrainGuard**

 

DrainGuard Width: 6" or 12"

Core Dimple Thickness: 1"

DrainGuard 6DrainGuard 6" x 150' Roll

DrainGuard strip drain is a composite foundation drainage material. The non-woven fabric prevents soils from clogging the DrainGuard.  DrainGuard can be used for foundations, yard and lawn drainage and landscaping drainage.

Uses:

  • Foundation groundwater drainage
  • Landscaping groundwater drainage
  • Lawn drainage

Benefits:

  • Low labor cost
  • Gravel is not needed for backfill

Core Dimple Thickness: 1"

DrainGuard 6 Inch x 50 Ft RollDrainGuard 6 Inch x 50 Ft Roll

Price: $35.26

DrainGuard strip drain 50' roll can be shipped for homeowner use.

6 Inch Corner Fitting6 Inch Corner Fitting

Price: $27.75

4/Box

Wraps 6" DrainGuard around inside and outside corners.

6 Inch End Outlet6 Inch End Outlet

Price: $25.75

4/Box

Connects 6" DrainGuard to 4 in. corrugated pipe for transport of water to day light or sump crock.

6 Inch Side Outlet6 Inch Side Outlet

Price: $25.75

4/Box

Use to make transition from 6" DrainGuard to 4 in. corrugated pipe for intermediate collection of water along footing.

6 Inch Step Down6 Inch Step Down

Price: $43.50

4/Box

For foundations with vertical step downs connects DrainGuard strip drain.

6 Inch Splice6 Inch Splice

Price: $19.90

4/Box

Use to connect two pieces of 6" DrainGuard strip drain together.

6 Inch Corner Outlet6 Inch Corner Outlet

Price: $25.75

4/Box

Makes a corner transition from 6" DrainGuard strip drain to 4 in. corrugated pipe.

6 Inch End Cap6 Inch End Cap

Price: $19.90

4/Box

Use to cover the end cut of 6" DrainGuard.

6 Inch Vertical Tee6 Inch Vertical Tee

Price: $30.75

4/Box

Vertical Tee connects perpendicular sections of DrainGuard strip drain.

A-Tech GeoTapeA-Tech GeoTape

Price: $25.36

2/Box

An underground waterproof seam tape which allows watertight junctions & connections and provides super stretchability. Use GeoTape to connect seams, overlaps, and connect DrainGuard fittings.

DrainGuard 12DrainGuard 12" x 150' Roll

DrainGuard strip drain is a composite foundation drainage material. The non-woven fabric prevents soils from clogging the DrainGuard. DrainGuard can be used for foundations, yard and lawn drainage and landscaping drainage.

Uses:

  • Foundation groundwater drainage
  • Landscaping groundwater drainage
  • Lawn drainage

Benefits:

  • Low labor cost
  • Gravel is not needed for backfill

Core Dimple Thickness: 1"

 

1212" Corner Fitting

Wraps 12" DrainGuard strip drain around inside and outside corners.

1212" End Outlet

Connects 12" DrainGuard strip drain to 4 in. corrugated pipe for transport of water to day light or sump crock.

1212" Side Outlet

Use to make transition from 12" DrainGuard strip drain to 4 in. corrugated pipe for intermediate collection of water along footing.

1212" Splice

Use to connect two pieces of 12" DrainGuard strip drain together.

1212" Corner Outlet

Makes a corner transition from 12" DrainGuard to 4 in. corrugated pipe.

1212" End Cap

Use to cover the end cut of 12" DrainGuard.